login   |    register
Eduard [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
124
Typhoon Wheels and guns
Brassin Typhoon Mk.IB wheels and gun sets
  • move

by: Andy Brazier [ BETHEYN ]


Originally published on:
AeroScale

Introduction
Airfix's 1/24th Hawker Typhoon in my opinion was the kit of 2014, and Eduard have released several sets to embellish the already incredible detail in the kit.
In the first part of two reviews, with the second part being the Photo Etch sets, we shall look at the two Brassin sets released.
Typhoon wheels
Item No - 624 001
Price - 8.40 (Hannants)
Packed in a blister pack, the two main wheels, tail wheel, four main wheel hubs and a small set of masks are well protected with a foam insert, so damage to the parts should be non existent.
Casting is superb, and each part is attached to a casting block, so some clean up will be required.
The main wheels are weighted, as is the kits parts, and have the sidewall tread pattern that the Airfix kit lacks. Also the main wheels are one piece unlike the kits offerings which are split into two halves, so no seam cleanup will be required attaching the Eduard wheels.
The two types of hubs are connected to the casting block on the glueing face, so razor saw will be needed as well as some sanding to clean up the rear of the hubs before placing into the respective wheel. The five spoke hubs are beautifully cast with bolt heads and the center bolt all present. The spoke holes are a lot more refined and sharper than the kits parts. The brake hub compared to the kits part is in a different class, with bolt heads and raised detail cast onto the hub, where as the kits part is rather plain and has little detail.
The tail wheel is a lot more realistic than the kits, with the ridged edges and concave appearance of the tyre faithfully reproduced.
A small set of instructions are supplied for the build sequence, what there is of it, and paint colours are given for Aqueous and Mr Color range of paints.
A set of Kabuki tape masks for the tyres, hubs and tail wheel are supplied with this set. Whether you decide to use them or not, for the main wheels is debatable as all the parts can be painted before inserting the hubs.
Conclusion
This set for me is a must have if you are serious about getting the best from the already very good Airfix kit.
95%

Typhoon guns
Item No - 624 002
Price - 11.30 (Hannants)
Packed in the same type of packaging as the previous set, the resin parts of which there are 16 parts are well cast and all have a small casting block attached.
The four Hispano Mk. II cannons are made up of a one piece barrel, a breach, and an ejector chute. A couple of 20mm ammo belts to go into the kits ammo trough to replace the kits simplistic moulding are also supplied.
Detail is exquisite with the one piece barrel having the muzzle pre-drilled, and the recoil sleeve moulded.
The breech block is just as good as the barrel with the detail a lot more refined than the kits part. The ammo case is moulded onto the breech as one piece, whereas the kits part is in two parts creating a slight seam mark. The case is also far more detailed, featuring rivet heads and raised detail not found on the kits part. The ejector chutes are far more refined than Airfix's offerings, with the semi recessed hole more crisply cast.
The ammo belts look more like shells, unlike the kits belts which really are not very good and just look like strips of plastic glued together.
A two page set of instructions are supplied, which has a 6 part build sequence. Eduard tell you via symbols and part numbers what parts are replaced, and what parts, such as the ammo belt casings, have resin parts attached. The build sequence is easy to follow.
If you are going to build your Airfix Typhoon with the gun hatches open, then you can't go far wrong with this set, as it does really add detail.
90%

Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE.
SUMMARY
Highs: Both sets have some very fine detail, and are well cast.
Lows: None really
Verdict: Both sets will really improve the look of the Typhoon, with the wheel set a pretty much must have.
  Scale: 1:24
  Mfg. ID: See text
  Suggested Retail: See text
  Related Link: 
  PUBLISHED: Mar 30, 2015
  NATIONALITY: United Kingdom
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 84.81%
  MAKER/PUBLISHER: 88.49%

Our Thanks to Eduard!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Andy Brazier (betheyn)
FROM: ENGLAND - SOUTH EAST, UNITED KINGDOM

I started modelling in the 70's with my Dad building Airfix aircraft kits. The memory of my Dad and I building and painting a Avro Lancaster on the kitchen table will always be with me. I then found a friend who enjoyed building models, and between us I think we built the entire range of 1/72 Airfi...

Copyright 2019 text by Andy Brazier [ BETHEYN ]. All rights reserved.



Comments

Wheels...meh...they're wheels...paint kit ones dirty, they look fine at a couple feet. The canon rounds...now they DO look much better than the kit parts. Much more definition. Will look good in the gun bays.
MAR 30, 2015 - 06:13 AM
   

What's Your Opinion?


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move